Order Online

Long Comic Book DrawerBoxes™ with BoxSort™ Rails

26" long - for maximum storage capacity
BoxSort™ Rails are an additional $ 2.35 per rail. You may order up to 5 per case.
Order 1 rail for each drawer in which you want to use Upright Dividers.
If you want to use Upright Dividers in every drawer, you will need 5 per case.

$ 92.50 x 5 Pack Set(s) of Long DrawerBoxes™
$ 2.35 x Long BoxSort™ Rails

$ 1.90 x BoxLox™ Box Anchor Packs

Short Comic Book DrawerBoxes™ with BoxSort™ Rails

18" long - short enough to fit in any closet or small space.
BoxSort™ Rails are an additional $ 2.35 per rail. You may order up to 5 per case.
Order 1 rail for each drawer in which you want to use Upright Dividers.
If you want to use Upright Dividers in every drawer, you will need 5 per case.

$ 82.50 x 5-pack sets of Short DrawerBoxes™

$ 2.35 x Short BoxSort™ Rails

$ 1.90 x BoxLox™ Box Anchor Packs

Magazine/CGC™ DrawerBoxes™ with BoxSort™ Rails

BoxSort™ Rails are an additional $ 2.35 per rail. You may order up to 4 per case.
Order 1 rail for each drawer in which you want to use Upright Dividers.
If you want to use Upright Dividers in every drawer, you will need 4 per case.

$ 70.00 x 4-pack sets of Magazine DrawerBoxes™

Please note that this size comes in packs of four.

$ 2.35 x Short BoxSort™ Rails

$ 1.90 x BoxLox™ Box Anchor Packs

LP Record DrawerBoxes™

Now for vinyl, too! Completely stackable. Comes with 4 BoxSort rails and uppright dividers. Just slip a divider into the last slot and your LP records fit perfectly without worrying about them slipping under the shell.

$ 79.40 x 4 Pack Set(s) of 4 pack sets of LP Record DrawerBoxes™
including 4 BoxSort rails and upright dividers.

Please note that this size comes in packs of four.

$ 1.90 x BoxLox™ Box Anchor Packs

BoxLox™

Each set of Boxlox™ ties 2 DrawerBoxes™ together, side by side The BoxLox™ Box Anchors are sold separately since how many each person uses depends on their configuration.

If you just want enough to keep the top unit from tipping (the lower units are counterbalanced by the one above), then you need one less BoxLox pack than the number of rows across. However, we have found they provide other benefits as well such as keeping the entire array more stable by preventing slippage if a unit is only lightly filled and increase the long term stacking strength on the lower units.

To use them throughout, multiply the number of rows high they are stacked times one less than the number of rows across. For example, 30 DrawerBoxes stacked 5 high could use 25 BoxLox™.

$ 1.90 x BoxLox™ Box Anchor Packs

BoxSort™ Rails

Every customer receives 4 multi-use dividers with each DrawerBox™. If you remove the "legs" along the perforations, they can be used like a regular divider. But if you leave the legs on and use them with the optional BoxSort™ Upright Divider rails, the dividers are held in a fixed position. This is useful to not only keep your collectibles from falling over, causing cracking along the spines, but will also create sections within the drawers, enabling you to better organize your contents.

The BoxSort™ rails can be ordered above along with the DrawerBoxes™, but if you need additional rails you can order them separately here. Order 1 rail pair per drawer you wish to use them in. Be sure to specify which size you need: long rails for long comics DrawerBoxes or short rails for the short comic and magazine sizes.

$ 2.35 x Long BoxSort™ Rails

$ 2.35 x Short BoxSort™ Rails